Grundfos Pressure Booster Pump

Product Details:

Grundfos SCALA1 is an all-in-one pressure boosting unit with a high-efficiency motor and hydraulics with low noise operation for domestic water supply and also light commercial applications. Built-in Bluetooth communication gives you complete control over the pump using the Grundfos GO REMOTE, also for twin pump operation.

This means that installation and commissioning has never been easier. The Grundfos GO REMOTE app also lets you see alarm status and get easy pump diagnostics. You can create and email reports on-site and access hard-to-reach installations remotely from the app  

Product Details:

Product Details :

Symbolic to all the success we have acquired in the industry, remains our status as a prominent enterprise engaged in offering premium quality gamut of Grundfos Variable Speed Pressure Pump.

Price Range : Rs.300000 To 1500000/Piece

Product Details:

The Grundfos CM Twin Booster set consists of two identical Grundfos CM pumps connected in parallel and mounted on a common base frame and a control cabinet incorporating motor protection and controller. 

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Grundfos SmART SUB Series, Single Phase and Three Phase Horizontal open well Submersible Pumps are designed for under water application, and therefore, there is no need for priming or a foot valve. These pumps are suitable for open wells or tanks where there are wide fluctuations in water level

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

The Grundfos CME Booster is a compact, frequency (VFD) controlled booster system for a large variety of domestic and light commercial applications. The CME Booster ensures great comfort by providing constant pressure, regardless of variations in demand or inlet pressure. In addition, the CME Booster makes it possible to adjust the water pressure just by the touch of a button. Also, the CME Booster is very easy to install. Once the booster has been connected to the pipeline, it is simply a matter of putting the plug into a socket, and the system is operational.

Product Details:

Product Details :

We are a renowned organisation in the industry to provide our patrons with the best quality range of Grundfos Scala2 Water Booster Pump.

Overview:
SCALA2 - Now Available!
Perfect water pressure – finally compact and easy to install
SCALA2 is a fully integrated water booster pump providing perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time. It packs pump, motor, tank, sensor, drive and non-return valve into one compact unit. And with its intelligent pump control, SCALA2 automatically adjusts performance to both inlet pressure and water consumption in the home. Thanks to a water-cooled motor, SCALA2 even offers one of the lowest noise levels of any booster on the market.

What is intelligent pump control?
SCALA2 features a built-in sensor, which constantly measures the discharge pressure. If the pressure drops below the desired level, SCALA2 boosts its operation immediately to compensate for the loss of pressure. We call it intelligent pump control and the result is perfect water pressure.

Benefits:

• Perfect water pressure: Intelligent pump control adjusts operation automatically
• Low noise: As quiet as a modern dishwasher (47 dB(A) in typical use)
• Easy selection: One variant for all domestic boosting needs
• Easy installation: Compact, all-in-one solution, plug-and-pumpEasy to operate: User-friendly control panel
• Reliable operation: Dry-running protection, anti-cycling
• Long lifetime: Quality-tested to perfection, maintenance-free

Applications:

• SCALA2 is the perfect choice for residential buildings with up to 3 floors and 8 taps.
• Boosting from mains: Increases the water pressure delivered by city mains
• Boosting from tanks: Increases water pressure from roof tanks, break tanks and ground tanks, including rainwater tanks.
• Boosting from wells: Pumps water from a depth of 8 metres
• Suitable for both Indoor and outdoor installation X4D and Enclosure type 3(US).

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Product Details :

The Grundfos SBA3-45 A is a submersible pump designed for the pumping of clean water for domestic and rainwater applications. It is silent when submerged and therefore a noiseless alternative to surface-mounted pumps. The pump is built from high quality composite and stainless steel materials that are resistant to corrosion.

The SBA3-45 A is equipped with a 15 m supply cable, and the maximum installation depth is 10 m below the water level, with a liquid temperature ranging from 0 °C to 40 °C.

The SBA3-45 A is ideal for operation in a well or ground tanks, as it easily prevents solid particles from entering the pump. The maximum particle size is 1 mm.

The pump features a float switch, which promises the user a convenient experience with automatic start/stop operation of the pump and provides dry running protection.

The single-phase model is effectively protected against any accidental overload by built-in thermal protection.

The pump has built-in thermal protection, which immediately stops the pump if it overheats. Having cooled down, the pump automatically restarts when it reaches a normal temperature.

Application:

• Pumping of clean water
• Rainwater systems
• Treated grey water irrigation
• Sprinkler operation
• Pumping water from tanks.

Features:

• 30.1 metre rated head
• 4 impellers
• 2800RPM rated driver speed
• 10 metre installation depth
• Composite pump housing and impellers

Product Details:

Product Details :

In order to retain our remarkable position in this industry, we are providing a wide array of Grundfos UP15-14B PM Brass Comfort Pump.

The Grundfos UP 15-14B PM (80) COMFORT circulator pump is a Brass secondary hot water service circulator, designed for

• domestic hot-water systems in single and two family houses
• small heating systems
• cooling and air-conditioning systems

Other Details:
The Grundfos COMFORT PM range sets new standards for energy-efficient hot water recirculation in domestic homes. Thanks to a low noise permanent magnet motor, energy consumption is reduced to as little as 5-8 W – while the superior AUTOADAPT function, ensuring that the pump runs only when required, which minimises both heat and power waste. The result is maximum comfort with a minimum of water, heat and electricity consumption.
The pump is suitable for open and closed systems however, it must be installed indoors and should only be fitted into pressurised hot water circulation systems.
This pump has 80mm port to port dimensions.

Product Details:

Product Details:

CM are reliable, quiet and compact horizontal end-suction pumps. The modular pump design makes it easy to make customised solutions. The CM pumps are available in cast iron and stainless steel

The Grundfos CM pumps are non-self-priming, horizontal, multistage, end-suction centrifugal pumps that are suitable for applications ranging from small domestic installations to large industrial systems.

Typical applications:

washing and cleaning

water treatment

temperature control

pressure boosting

distilling systems

dosing/mixing

evaporation

comprised machinery

chemical industry

pharmaceutical industry

Standard Features:

Compact design

Modular construction/customised solutions

Energy-optimised pumps

Worldwide usage

High reliability

Easy installation and commissioning

Service-friendly

Description:

Grundfos CM-I pumps are made from 304 Stainless Steel (EN1.4301). CM1 and CM3 pumps have 1" BSPF pipe connections.

Suitable for 

• Commercial air conditioning
• Commercial water pressure boosting
• District heating
• Domestic water pressure boosting
• Industrial cleaning process
• Industrial heating
• Desalination
• Industrial water supply & transfer
• Irrigation
• Water distribution
• Drip micro spray
• Frost protection
• Pivot pressure boosting
• Irrigation surface water and transfer

 

 

Product Details:

Product Details :

Submersible drainage pump Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible totally enclosed motor. The pump is fitted with a suction strainer. Fitted with a SEMI OPEN impeller with a 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar. The pump is fitted with a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. A cooling jacket allows for continuous cooling of the motor by the pumped liquid. The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable.

Features Robust design
The materials of the pump ensure excellent corrosionresistance. The pump housing and impeller are made of highquality stainless steel. Furthermore, the mechanical shaft sealoffers high-wear resistance and a long operating life.

Thermal overload protection

• The single-phase version is effectively protected against anyaccidental overload by built-in thermal protection.This means that no additional motor protection is required.

Option for automatic operation

• The pumps are available with float switches for automatic on/off operation.

Auto coupling

• UNILIFT AP Basic pumps are suitable for installation on anauto coupling at the bottom of a collecting tank with guiderails going to the top. A guide rail system is available fromGrundfos as an accessor

Product Details:

Product Details :

The CMBE Booster is designed for domestic and commercial water supply, pressure boosting, irrigation and dewatering applications.
The CMBE series is available in both 1x110-120V and 1x200-240V variants and uses energy efficient, permanent magnet motor technology, which provides unmatched reliability, quiet operation, and energy savings.
Thanks to the integrated speed controller, the CMBE keeps a constant pressure in the pipe system. A pressure sensor monitoring discharge pressure will signal to the speed controller to change the motor speed to adapt the performance to the new situation.

Features :

• Constant pressure via integrated speed control
• Compact design
• Robust, stainless steel design
• Easy installation
• Low energy consumption
• Dry-running protection
• Noise level below 55 dBA and even lower at controlled speed

The CMBE Booster is a complete pump system preassembled with the following components:

• CME pump with integrated frequency converter
• 5-way fitting with non-return valve
• Diaphragm tank
• Pressure gauge
• Pressure sensor

Other Details :

The simple control panel features the GRUNDFOS Eye that indicates system status, warnings and alarms. Adjusting to the desired setpoint is easy using the one-touch control buttons. The light fields on the control panel will indicate the setpoint setting.
Additionally, you can use the Grundfos GO App to communicate with the CBME. Grundfos GO is gives you intuitive handheld pump control, and full access to all the Grundfos Online tools on the go.
Download the free Grundfos GO App available on the App Store and Google play.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Product Details :

UPS pumps constitute a complete range of 3-speed circulator pumps, available both in 50 and 60 Hz. The pumps can be used in both open and closed systems. UPS pumps are of the canned-rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.

UPS pumps are designed for circulation of liquids in heating and air-conditioning systems. Pumps with bronze or stainless steel housings are also suitable for use in hot-water service systems. Examples of typical

Applications are :

• Main pumps
• Zone pumps
• Boiler shunt pumps
• Pumps for heating surfaces
• Calorifiers
• Underfloor heating systems
• Solar heating systems
• Heat pump systems
• Geothermal heating systems
• Heat recovery systems
• Two-pipe air-conditioning systems
• Pumps for refrigeration units

Features and benefits:

• Maintenance-free
• Low noise
• Low energy
• Complete range
• Available with corrosion-resistant stainless steel or bronze pump housing
• Wide range of accessories

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Our in-depth knowledge and industrial expertise enable us to provide a distinguished range of Grundfos High Pressure Pump.

Price Range:Rs.30000 To 300000/Piece

Product Details:

Product Details :

The most robust pump designed ever for water pressure boosting
It was once said that great things come in small packages. When you meet the Grundfos CM booster pump for the first time, you’ll certainly agree. This horizontal multi-stage pump has been created with compactness and modularity as two of its central features. Add reliability and quiet operation to the mix, and another innovative pump solution from Grundfos is born.
Centrifugal modular. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application

Application:

• CM pump with pressure controller is used for constant water pressure. Can be ideal when space is constraint near overhead tank.
• CM pump is also supplied with pressure tank for constant water pressure. When the pressure drops to the pre-set level, the pump will start-up and when the water consumption drops again, the outlet pressure will rise to a pre-set stop pressure after which the pump will stop. Available from 8 lts to 100 lts tank range.

Features:

• Liquid temperature from 20 °C upto 120 °C
• Built-in thermal protection
• F class installation
• 80 Start / Stop per hour

Construction:

• Electro-coated cast iron parts - free from corrosion
• High efficient motor
• Horizontal multistage centrifugal pump
• Long life components are of corrosion and wear resistance stainless steel

Benefits :

• Highly Reliable
• Compact Design and Silent Operation
• Wide Performance Range

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

The GT pressure tanks for cold-water applications are long life tanks for both domestic and industrial applications. The GT tank ensures controlled pressure in your water supply. The result of this is better comfort in your installation by limiting the start/stop frequency of your pump, compensation for pressure drops and eliminating water hammer in pipework. GT tanks can be integrated in many different installations with a wide variety of pumps.

Product Details:

The Grundfos MAGNA3 is a circulator pump with permanent magnet motor that will fit both heating, cooling and domestic hot water circulation, making it the obvious choice for almost any building project old or new. With its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for building owners, engineers and specifiers looking to create high-performance systems for buildings. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

It was once said that great things come in small packages. When you meet the Grundfos CM pump for the first time, you’ll certainly agree. This horizontal multi-stage pump has been created with compactness and modularity as two of its central features. Adding reliability and quiet operation to the mix, another innovative pump solution from Grundfos is born. Centrifugal Modular, the pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, whatever the application is

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

The Grundfos CMB with PT is a compact booster pump designed for domestic and light commercial use. The booster unit consists of a Grundfos CM pump with stainless steel hydraulic components and a pressure tank. The CM pump is supplied with a pressure tank for even distribution of water pressure. When the water demand increases, there will be a pressure drop in the pipeline from the pre-set level. The pump automatically starts till it reaches pre-set cut-off pressure. The systems are available with 24 Lts & 60 Lts pressure tank. 

Product Details:

Product Details :
Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel

The CR, CRN high pressure series is a multipurpose high pressure water pump range suitable for a variety of different applications demanding positive displacement with reliable and cost-efficient supply. CR, CRN handles a variety of liquids from potable water to industrial liquids within a very wide temperature, flow and pressure scale.
CRNE 1 and 3 HS - CRNE-HS is a single pump solution capable of generating up to 692 psi. The CRNE-HS pump is a non selfpriming, vertical multistage centrifugal pump fitted with a high speed Grundfos motor with integrated frequency converter, type MLE. The direction of rotation is the opposite of that of standard pumps, and the chamber stack is turned upside-down, resulting in the pumped liquid flowing in the opposite direction.
CRN 5, 10, 15, and 20 SF - CRN-SF is a double pump system capable of generating up to 696 psi. The system consists of two pumps in series. The first pump is a standard pump for feeding. The second pump is especially designed for high pressures. This data booklet covers technical information about the high pressure pump. The CRN-SF pump is a non-selfpriming, vertical multistage centrifugal pump fitted with a Grundfos specified TEFC-motor. The pump consists of a base and a pump head. The pump body and the outer sleeve are secured between the base and the pump head by means of staybolts. The direction of rotation is the opposite of that of standard pumps, and the chamber stack is turned upside-down, resulting in the pumped liquid flowing in the opposite direction.
CR32, CRN 32 - CR, CRN is a pump capable of generating up to 568 psi. The pump is especially designed for high pressures. This product guide covers technical information about the high pressure pump. The CR, CRN high pressure pump is a non-selfpriming, vertical multistage centrifugal pump fitted with a Grundfos specified motor and a specially developed high-pressure shaft seal. When necessary it includes a special pump sleeve and a bearing flange which make the pump capable of handling higher pressures.
2xCR(N) 45, 64, and 90 - 2 x CR, CRN is a double pump system capable of generating up to 557 psi. The system consists of two pumps in series. The first pump is a standard pump for feeding. The second pump is can be a specially designed pump for high pressures. This product guide covers technical information about the high pressure pump. The CR, CRN high pressure pump is a non-selfpriming, vertical multistage centrifugal pump fitted with a Grundfos specified motor and a specially developed high-pressure shaft seal. When necessary it includes a special pump sleeve and a bearing flange which make the pump capable of handling higher pressures.
2x CR(N) 120 and 150 - 2 x CR, CRN is a double pump system capable of generating up to 557 psi. The system consists of two pumps in series. The first pump is a standard pump for feeding. The second pump is specially designed for high pressures. This product guide covers technical information about the high pressure pump. The CR, CRN high pressure pump is a non-selfpriming, vertical multistage centrifugal pump fitted with a Grundfos specified motor and a specially developed high-pressure shaft seal. When necessary it includes a special pump sleeve and a bearing flange which make the pump capable of handling higher pressures.

Applications:

• Process water Washing and cleaning High-pressure washdown Boiler feed and condensate Ultra-filtration Reverse Osmosis Positive Displacement

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

The Grundfos SP is a 4-inch multi-stage submersible pump, designed for operation in boreholes. SP is made of corrosion resistant stainless steel, offering high operating reliability regardless of the application. The SP offers high efficiency along with high resistance to sand and other abrasive particles.

Product Details:

The Grundfos SQE is a small and compact submersible multi-stage pump. The motor of the SQE pump is a permanent magnet motor with a micro frequency converter ensuring optimum efficiency. The built-in frequency converter features protective functions and soft-starting, which reduces starting current and gives smooth and steady acceleration and dry running protection. The SQE pump is handy and user-friendly due to its low weight and 3-inch diameter.

Product Details:

The Grundfos COMFORT range is designed for re-circulation of domestic hot water in small family houses. The COMFORT PM range is a high efficiency choice with an energy usage of only 8 W. The intelligent COMFORT AUTOADAPT PM automatically adapts to the individual’s hot water consumption pattern in the household and only runs when hot water is needed.

Product Details:

We are engaged in offering a wide range of  quality Products to our clients. Our range of all products is widely appreciated by our clients.